FP Evo 9 71HTA CHRA Super Core (2001020)
The FP 71HTA CHRA Super Core is the best "+1" turbo upgrade for your Evo 8/9 project on a budget. This super core bolts into your stock Evo 9 turbine housing so you're ready to make more power with minimal work!
For Evo 8 Install:
This is based on an Evo 9 CHRA so if you're putting it in your Evo 8 you will need to purchase the FP Evo 4-8 Turbo Install Kit. Get the divided inlet gasket for MHI housing and the oil line for journal bearing turbo.
For Evo 9 Install:
This is a direct fit to oil and water lines if you already have an Evo 9 turbo.
Includes:
Compressor housing and wheel as pictured.
This is not a full turbo.
You must assemble this to your stock Evo 9 turbo.
Shipping Time: (8-10 Weeks)
FP Turbos are built to your spec. These are not in stock. Typical wait time has been 8-10 weeks.
For Evo 8 Install:
This is based on an Evo 9 CHRA so if you're putting it in your Evo 8 you will need to purchase the FP Evo 4-8 Turbo Install Kit. Get the divided inlet gasket for MHI housing and the oil line for journal bearing turbo.
For Evo 9 Install:
This is a direct fit to oil and water lines if you already have an Evo 9 turbo.
Includes:
Compressor housing and wheel as pictured.
This is not a full turbo.
You must assemble this to your stock Evo 9 turbo.
Shipping Time: (8-10 Weeks)
FP Turbos are built to your spec. These are not in stock. Typical wait time has been 8-10 weeks.
Evo 9 71HTA CHRA Specs:
| Compressor Wheel | 71HTA |
| Flow Rating | 51LB per minute |
| CW Measurements | 51.2MM Inducer / 68MM Exducer |
| TW Measurements | 55.9MM Inducer / 49MM Exducer |
| Compressor Housing | 84MM Flow Advancement Port Cover |
| CHRA | FP Journal Bearing |
| FP Part Number | 2001020 |
See more Forced Performance Products
 |
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov |